MC10LVEP11, MC100LVEP11

www.onsemi.com

8

Figure 3. Typical Phase Noise Plot at

Figure 4. Typical Phase Noise Plot at

Figure 5. Typical Phase Noise Plot at

Figure 6. Typical Phase Noise Plot at

The above phase noise plots captured using Agilent

E5052A show additive phase noise of the MC100LVEP11

device at frequencies 156.25 MHz, 311.04 MHz, 1.5 GHz

and 2 GHz respectively at an operating voltage of 3.3 V in

room temperature. The RMS Phase Jitter contributed by the

device (integrated between 12 kHz and 20 MHz; as shown

in the shaded region of the plot) at each of the frequencies

is 66 fs, 37 fs, 14 fs and 13 fs respectively. The input source

used for the phase noise measurements is Agilent E8663B.