Zakładka z wyszukiwarką danych komponentów |
|
UZO12.07 Arkusz danych(PDF) 3 Page - PULS GmbH |
|
UZO12.07 Arkusz danych(HTML) 3 Page - PULS GmbH |
3 / 11 page UZK12.071, UZO12.07 U-Series BATTERY MODULE 12V, 7AH 5. INTENDED USE This module is designed for installation in an enclosure and is intended for the general professional use such as in industrial control, office, communication, and instrumentation equipment. Do not use this module in equipment, where malfunction may cause severe personal injury or threaten human life. 6. INSTRUCTIONS FOR DISPOSAL OF THE BATTERIES Batteries must be completely discharged before replacement and can be returned to the supplier of the battery module or the battery manufacturer for disposal. Always dispose batteries through a recycling organization. 7. INSTRUCTIONS FOR BATTERY STORAGE Do not store batteries or battery modules at temperatures higher than 25°C or performance and lifetime may change. Do not store discharged batteries. Keep batteries fully charged! Charge retention is important to get the longest battery life. Stored batteries which are not fully charged age faster then charged batteries. Do not store batteries longer than 9 months without charging or performance and lifetime may change. Every 9 months or whenever the open circuit voltage (OCV) falls below 12.6V, the battery module should be charged. Apply a charging voltage of 13.8V (at 25°C) for 72 hours. Batteries with an OCV below 12V must not be charged anymore and must be disposed. 8. INSTALLATION INSTRUCTIONS This device may only be installed and put into operation by qualified personnel. Before initial use, check the last charging which is marked on the battery. If it is older than 9 month, replace the battery. Do not install the battery fuse until the installation work is complete. This device does not contain serviceable parts, except the fuse or replacement battery. If malfunction should occur during installation or operation, first check the fuse and battery for proper functionality. If the unit is damaged or if the malfunction continues, immediately turn power off and send device to the factory for inspection. Replacement fuses must be of the same type or an UL listed fuse with the same nominal value and characteristics. Do not short-circuit the battery poles or power wires and always check correct battery polarity. Mount the device onto a heavy duty DIN-rail or screw it securely on a flat surface. Before mounting the unit on a flat surface, detach the DIN-rail slider (remove the plastic lock mechanism by using a flat-blade screwdriver and move the lock downwards while pushing the plastic slide upwards at the same time) and the two aluminum DIN-rail brackets (Torx T10 screwdriver). Do not install the battery module upside down. Aug. 2017 / Rev. 2.2 DS-UZK12.071 All parameters are typical values specified at, 25°C ambient temperature unless otherwise noted. www.pulspower.com Phone +49 89 9278 0 Germany 3/11 |
Podobny numer części - UZO12.07 |
|
Podobny opis - UZO12.07 |
|
|
Link URL |
Polityka prywatności |
ALLDATASHEET.PL |
Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Linki | Lista producentów All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |