Zakładka z wyszukiwarką danych komponentów |
|
AM50-0004 Arkusz danych(PDF) 3 Page - Tyco Electronics |
|
AM50-0004 Arkusz danych(HTML) 3 Page - Tyco Electronics |
3 / 5 page High Dynamic Range Low Noise Amplifier 1400 - 2000 MHz AM50-0004 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. V6 3 Cross Section View RF Traces & Components RF Ground DC Routing Customer Defined The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ω lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of .008” (0.20 mm) yielding a 50 Ω line width of 0.015” (0.38 mm). The recommended RF metalization is 1 ounce copper. The AM50-0004SMB Designer’s Kit allows for immediate evaluation of M/A-COM’s AM50-0004. The Designer’s Kit includes an AM50-0004 mounted on an evaluation board and five loose AM50-0004’s. The evaluation board consists of the recommended external surface mount circuitry, RF connectors, and a DC multi-pin connector, all mounted to a multi-layer FR-4 PCB. The AM50-0004SMB evaluation PCB is illustrated below with all functional ports labeled. Designer’s Kit AM50-0004SMB Evaluation PCB & RF Connector Losses Port Reference Approximate RF Loss RF In 0.15 dB @ 1785 MHz RF Out 0.15 dB @ 1785 MHz The DC connector on the Designer’s Kit PCB allows convenient DC line access. This is accomplished by the one or more of the following methods. 1. A mating female multi-pin connector (Newark Electronics Stock # 46F-4658, not included). 2. Wires soldered to the necessary pins (not included). 3. Clip leads (not included). Recommended PCB Configuration Layout View AM50-0004 Evaluation Board |
Podobny numer części - AM50-0004 |
|
Podobny opis - AM50-0004 |
|
|
Link URL |
Polityka prywatności |
ALLDATASHEET.PL |
Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Linki | Lista producentów All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |