Zakładka z wyszukiwarką danych komponentów |
|
ML145428-6P Arkusz danych(PDF) 6 Page - LANSDALE Semiconductor Inc. |
|
ML145428-6P Arkusz danych(HTML) 6 Page - LANSDALE Semiconductor Inc. |
6 / 14 page www.lansdale.com Page 6 of 14 Issue 0 LANSDALE Semiconductor, Inc. ML145428 CIRCUIT DESCRIPTION The ML145428 Data Set Interface provides a means for con- version of an asynchronous (start/stop format) data channel to a synchronous data channel and synchronous to asynchronous data channel conversion. Although primarily intended to facili- tate the implementation of RS - 232 compatible asynchronous data ports in digital telephone sets using the MC145422/26 UDLTs, this device is also useful in many applications that require the conversion of synchronous and asynchronous data. TRANSMIT CIRCUIT Asynchronous data is input on the TxD pin. This data is expected to consist of a start bit (logic low) followed by eight or nine data bits and one or more stop bits (logic high). The length of the data word is selected by the DL pin. The data baud rate is selected with the BR1, BR1 and BR3 pins to obtain the internal sampling clock. This internal sampling clock is selected to be 16 times the baud rate at the TxD pin. An externally supplied 16 times clock may also be used, in which case the BR1, BR2, and BR3 pins should all be at logic zero and the 16 times sampling clock supplied at the BC pin. Data input at the TxD pin is stripped of start and stop bits and is loaded into a four–word deep FIFO register. A break condition is also recognized at the TxD pin and this informa- tion is relayed to the synchronous channel transmitter which codes this condition so it may be re–created at the remote receiving device. The synchronous channel transmitter sends one bit at a time under control of the DC, CM and DOE pins. The synchronous channel transmitter transmits one of three possible data pat- terns based on whether or not the top of the Tx FIFO is full and whether or not a break condition has been recognized by the data stripper. When no data is available at the top of the Tx FIFO for transmission, the synchronous data transmitter sends a special synchronizing flag pattern (011111110). When a break condition is detected by the data stripper and no data is available at the top of the Tx FIFO, the break pattern (111111110) is sent. Figure 2A depicts this operation. |
Podobny numer części - ML145428-6P |
|
Podobny opis - ML145428-6P |
|
|
Link URL |
Polityka prywatności |
ALLDATASHEET.PL |
Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Linki | Lista producentów All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |