Zakładka z wyszukiwarką danych komponentów
Selected language     Polish  ▼
Nazwa części

ADXL327BCPZ-RL7 Datasheet(Arkusz danych) 10 Page - Analog Devices

Numer części ADXL327BCPZ-RL7
Szczegółowy opis  Small, Low Power, 3-Axis ±2 g Accelerometer
Pobierz  16 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Producent  AD [Analog Devices]
Strona internetowa

 10 page
background image
Rev. 0 | Page 10 of 16
The ADXL327 is a complete 3-axis acceleration measurement
system. The ADXL327 has a measurement range of ±2 g minimum.
It contains a polysilicon surface micromachined sensor and signal
conditioning circuitry to implement an open-loop acceleration
measurement architecture. The output signals are analog voltages
that are proportional to acceleration. The accelerometer can
measure the static acceleration of gravity in tilt sensing applications,
as well as dynamic acceleration, resulting from motion, shock,
or vibration.
The sensor is a polysilicon surface micromachined structure
built on top of a silicon wafer. Polysilicon springs suspend the
structure over the surface of the wafer and provide a resistance
against acceleration forces. Deflection of the structure is measured
using a differential capacitor that consists of independent fixed
plates and plates attached to the moving mass. The fixed plates
are driven by 180° out-of-phase square waves. Acceleration deflects
the moving mass and unbalances the differential capacitor resulting
in a sensor output whose amplitude is proportional to acceleration.
Phase-sensitive demodulation techniques are then used to
determine the magnitude and direction of the acceleration.
The demodulator output is amplified and brought off-chip through
a 32 kΩ resistor. The user then sets the signal bandwidth of the
device by adding a capacitor. This filtering improves measurement
resolution and helps prevent aliasing.
The ADXL327 uses a single structure for sensing the X, Y, and Z axes.
As a result, the three axes sense directions are highly orthogonal
with little cross-axis sensitivity. Mechanical misalignment of the
sensor die to the package is the chief source of cross-axis sensitivity.
Mechanical misalignment can, of course, be calibrated out at
the system level.
Rather than using additional temperature compensation circuitry,
innovative design techniques ensure that high performance is
built-in to the ADXL327. As a result, there is neither quantization
error nor nonmonotonic behavior, and temperature hysteresis is
very low (typically <3 mg over the −25°C to +70°C temperature

Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16 

Datasheet Download

Link URL

Czy Alldatasheet okazała się pomocna?  [ DONATE ]  

O Alldatasheet   |   Reklama   |   Kontakt   |   Polityka prywatności   |   Dodaj do ulubionych   |   Linki   |   Lista producentów
All Rights Reserved©

Mirror Sites
English :  ,  |   Chinese :  |   German :  |   Japanese :  |   Russian :
Korean :   |   Spanish :  |   French :  |   Italian :  |   Portuguese :  |   Polish :