Zakładka z wyszukiwarką danych komponentów |
|
CBC3150-D9C Arkusz danych(PDF) 5 Page - Cymbet Corporation |
|
CBC3150-D9C Arkusz danych(HTML) 5 Page - Cymbet Corporation |
5 / 15 page CBC-EVAL-10 EnerChip CC EH Evaluation Kit ©2011 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-20 Rev A Page 5 of 15 CBC-EVAL-10 Module Connector Descriptions J3: Terminal block for connecting the positive and negative terminals of an external non-rechargeable battery. See specifications elsewhere in this document for the minimum and maximum allowable battery voltage before attaching a battery to this connector. J7: Header pins to be used only for the purpose of connecting the positive and negative terminals of an external 4.1V rechargeable battery. No other connections are allowed on these pins and the pins are not to be shorted together. See specifications elsewhere in this document for the minimum and maximum allowable external battery voltage before attaching a battery to this connector. J8: Terminal block for connecting a photovoltaic cell (or other DC voltage). See specifications elsewhere in this document for the minimum and maximum allowable DC voltage to be applied to this connector. J9 and J10: Power and handshaking signals for connection to a target board - e.g. wireless end-point module. (For reference, header connector J9 is a 5-pin section of Samtec 50-pin header p/n TSW-150-07-G-S. Header connector J10 is Mill-Max p/n 850-10-006-20-001000; the socket it mates to is Mill-Max p/n 851-93-006-20- 001000.) J14: Used for factory test purposes only. Do not make any connections to J14. Cable Assembly - A 5-conductor cable with a header connector at each end is provided with CBC-EVAL-10 to facilitate connection between the J9 connector and a 5-pin header on the user’s board. Getting Started To operate the CBC-EVAL-10 in the standard energy harvesting mode, using the EnerChips as the storage devices, leave each of the several jumpers in the same position as received. The factory default settings are as follows: Header Shorting Jumper, Connector, or Solder Trace/Pad J1 No J2 No J3 No J4 Yes J5 Yes J6 Yes J7 No. DO NOT APPLY A SHORTING JUMPER TO J7 UNDER ANY CIRCUMSTANCES! Doing so will destroy the EnerChips. J8 PV Cell Input (2.5VDC to 5.5VDC) J9 System I/O (See J9 and J10 Pin Descriptions Table) J10 System I/O (See J9 and J10 Pin Descriptions Table) J11 Pin 3 to Pin 4 J12 Leave as is for 2.5V Regulated Output (Cut J12 and Short J13 for 3.0V Regulation) J13 Leave as is for 2.5V Regulated Output (Cut J12 and Short J13 for 3.0V Regulation) J14 No Connections Necessary (Used for Factory Testing) J15 Leave as is for 2.5V Regulated Output |
Podobny numer części - CBC3150-D9C |
|
Podobny opis - CBC3150-D9C |
|
|
Link URL |
Polityka prywatności |
ALLDATASHEET.PL |
Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Linki | Lista producentów All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |