SPECIFICATION CONTROL DRAWING

Tyco Electronics Corporation

305 Constitution Drive

Menlo Park, CA 94025, USA

Raychem

Products

TITLE :

STUB SPLICE SEALING

SYSTEM,

TIN PLATED CRIMP

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.

INCHES DIMENSIONS ARE BETWEEN BRACKETS.

DOCUMENT NO.:

D-436-0128

TOLERANCES:

0.00 N/A

0.0 N/A

0 N/A

ANGLES: N/A

ROUGHNESS IN

MICRON

Tyco Electronics reserves the right to amend this

drawing at any time. Users should evaluate the

suitability of the product for their application.

DATE:

26-Jan.-00

DOC ISSUE:

2

DRAWN BY:

M. FORONDA

REPLACES:

D001280

DCR NUMBER:

D010047

PROD. REV.

A

SCALE:

None

SIZE:

A

SHEET:

1 of 1

If this document is printed it becomes uncontrolled. Check for the latest revision.

MATERIALS

1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene

fluoride.

2. MELTABLE INSERTS: Low-outgassing thermoplastic, color-natural.

3. SEAMLESS STUB SPLICE: Base Metal: Copper Alloy 101 or 102 per ASTM B-75.

Plating: Tin plated per MIL-T-10727.

CMA Range: 300 to 1510 circular mils.

APPLICATION

1. This system is designed to provide an environmentally resistant splice in wires rated for at least 125

°C. Splices may be

either two wire stub splices or 1 to 1 or 2 to 1 parallel splices. If two wires exit from one end, they must have a combined

outer diameter of less than 2.03 (0.080).

2. Parts when installed as detailed on Raychem Specification Control Drawing D-436-58/-59 shall meet

performance requirements of MIL-S-81824.

3. Acceptance testing shall be in accordance with Paragraph 4.6 of MIL-S-81824.