 |
Zakładka z wyszukiwarką danych komponentów |
|
|
Zakładka z wyszukiwarką danych komponentów |
|
543382-8 Arkusz danych(PDF) 3 Page - TE Connectivity Ltd |
|
||||||||||||||||||||||||||||||
543382-8 Arkusz danych(HTML) 3 Page - TE Connectivity Ltd |
|
|
3 / 6 page  408-9404 3 of 6 Rev D 2. Slide thumb over the wire toward the end of the tip. NOTE The wire must be positioned inside the wire slot of the tip. 3. Slide tip over contact wire barrel until the tip butts against the contact shoulder. 4. Align contact with the BACK of the contact cavity. Push contact straight into the contact cavity until the contact bottoms. 5. Remove the insertion tool; then pull back on the wire to ensure that the contact is locked into the contact cavity. 4.2. Extracting A Wire Crimped Contact (Figure 4) 1. Position tool handle between thumb and fingertips, and align contact wire with the wire slot on the tip. Hold wire in this position with your thumb. 2. Slide your thumb over the wire toward the end of the insertion tip. NOTE The wire must be positioned inside the wire slot of the tip. 3. Place tip over the contact post or crimp barrel and slide the tip straight into the contact cavity until the tip bottoms against the contact shoulder. 4. Holding the wire tight against the tool handle, pull back on the tool handle to extract the contact. If you experience difficulty in extracting the contact, repeat Steps 1 through 4. 4.3. Inserting A Posted Contact (Figure 5) 1. Place the contact in the contact cavity. Do NOT push on the contact post. 2. Position the tip over the contact post. Move the tool along the post until the tip butts against the contact stabilizer. Align the tip on the stabilizer as shown in Figure 5. 3. Hold the tool handle, and push the contact post to make certain that the contact is locked in the cavity. NOTE Contacts with tail lengths longer than 10.85 mm [.427 in.] must use yellow color coded insertion tips. Figure 4 NOTE i NOTE i NOTE i Back of Receptacle Connector 205439-1 (Ref) Wire Slot Slide Extraction Tip Over Contact Post or Crimp Barrel Extraction Handle Wire |
Podobny numer części - 543382-8 |
|
Podobny opis - 543382-8 |
|
|
|
Link URL |
| Polityka prywatności |
| ALLDATASHEET.PL |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Linki | Lista producentów All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Polish ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
